By Otsile Kadiege

MINI is no stranger to creating unique models in limited numbers. The brand’s latest limited-edition model (999 units worldwide) comes in the form of a John Cooper Works model called 1to6. As expected, this special model sports unique touches both on the inside and outside, and its solely available with a 6-speed manual transmission, which gives the 1to6 its name.

John Cooper Works 1to6 Edition exterior

 The front end of the 1to6 is characterized by the radiator grille with large air inlets for optimal temperature control of the engine and brakes and a surrounding completely in Piano Black. In combination with the Midnight Black body color, the black design details give the vehicle an untamed appearance. The brand-typical side scuttles as well as the waistline finisher are also designed in Piano Black.

From the bonnet to the aerodynamic rear spoiler and the rear apron, the edition-specific, center-running Bonnet Stripe with edition-specific graphics underlines MINI’s motorsport history. The MINI John Cooper Works 1to6 Edition embodies the vehicle’s irrepressible desire for freedom – on the racetrack or in everyday life. The edition logo in silver, white and red marks the limited-edition character on the exterior with corresponding badges on the C-pillar and the rear of the vehicle and is also embedded in the side scuttles. 18-inch Circuit Spoke rims in Jet Black complete the exceptional look of the edition model.

John Cooper Works 1to6 Edition interior

Stepping inside you are greeted by door sills with an edition-specific 1to6 logo-design highlighting the exclusive character of the interior. The 3D-embossed decorative surface on the passenger side echoes the edition logo in a subtle tone-on-tone design, while the black lettering “One of 999” on the left of the steering wheel refers to the strict limited edition of the MINI John Cooper Works 1to6 Edition. The gear shift is located in the middle of the cockpit, featured in the colors of the edition logo with a red background graphic and red leather stitching.

The typical MINI central instrument picks up on the design with the glowing red bezel and, together with the red ambient lighting, creates an atmospheric contrast with the anthracite-colored headliner. The lower spoke of the nappa leather sports steering wheel and the floor mats once again feature the MINI John Cooper Works 1to6 Edition emblem. The edition is rounded off by specific key caps in the 1to6 logo-design.

John Cooper Works 1to6 Edition performance

Powering the limited-edition model is a 2.0-litre four-cylinder twinpower turbo engine. Power and torque details haven’t been shared, however it will most likely deliver an unchanged 170kW and 320Nm. As mention above, the 1to6 will only be sold with a 6-speed manual gearbox.

World premiere and availability

 the world premiere of the limited-edition model will take place at the 24-hour race at the Nürburgring on May 20, 2023. A MINI John Cooper Works of the 1to6 Edition, specially modified for this race, will together with the MINI John Cooper Works of the Bulldog Racing Team continue MINI’s tradition-steeped racing history at the race.

From September 2023, the exclusive MINI John Cooper Works 1to6 Edition model will be available in Europe, the USA, Canada and Mexico.